After lots of thinking and designing, the time has finally come to make some sawdust and see if I can actually make my ideas a reality.
This pile should be enough for both pontoons + parts of the middle deck. I’m not sure what to do with the cabin, so I’ll get wood when I get to that part.
Laying out and connecting the planking for the sides of the first pontoon. I made the connection with a simple butt join and glued a piece of plywood on top of the butt. Not the prettiest, but should be plenty strong for what I need.
Sawing the bulkheads sure makes a lot of dust. I cut bulkheads for both pontoons. Hope I got the numbers right 🙂
Just follow the plans…
I will round off the edges and add a few layers of glass later. Should do the job. The front section, up to the first bulkhead, will be sealed permanently for make an air tight chamber. I wonder if I should fill it with foam or something else? I will impregnate the wall inside and out with epoxy.
That actually went a lot easier than I expected. I dreaded having to adjust the curvature multiple times, but somehow it fit on the first try. Very happy with the results 🙂